Casio YA-S10 User Guide User Manual
Page 2
2
Performing Control Box Operations ............. 3
Control Box Remote Controller......................... 3
Control Box Keys and Indicators ...................... 3
To change the input source (INPUT) ................. 4
Adjusting an RGB Input Signal Automatically
(AUTO) ........................................................... 4
Blanking the Image and Muting the Audio
(BLANK) ......................................................... 4
Freezing an Image (FREEZE)............................. 4
Changing the Aspect Ratio of the Input
Source Image (ASPECT) ................................ 5
Using the Setup Menu.................................... 8
Using Wired LAN to Control the
Projector System ...................................... 11
Supported External Devices............................ 11
Using a Computer to Configure Control Box
LAN Settings ................................................ 11
Operating the Projector System Using
RS-232C Commands ................................ 14
Command Send Format .................................. 14
Command List ................................................. 15
Indicator ........................................................ 16
Troubleshooting ........................................... 17
Appendix ....................................................... 18
Supported Signals ........................................... 18
Terms and Conventions
z The term “Projector System” in this manual refers to the systems below.
• XJ-SK600 Dual Projection System
• XJ-SK650 Dual Projection System
• The projector systems made up of the YA-S10 Geometric Correction Box (referred to as “Control
Box” in this manual) connected to one or two separately available CASIO projectors
z Use the Control Box remote controller (YT-200) [S], [T], [W], and [X] keys to select setting items on a
dialog box or menu displayed on the projection screen. Use these keys when instructed to “select
xxx” in this manual.
Note
Some models covered by this manual may not be available in certain geographic areas.
Contents