Epson 8900 Series - Manual (Page 54)

Character Sets and Global Commands 3-23
Selecting an Automatic Sheet Feeder Bin
Escape sequence: ESC DLE EM n
Hexadecimal: 1B 10 19 n
This command selects the ASF bin designated by the variable n,
where n can range from 30 through 33 hex as follows:
0 (30H) = Load from current bin
1 (31H) = Select & load from bin 1
2 (32H) = Select & load from bin 2
3 (33H) = Load from current bin
If the command is received with paper loaded from a friction feed
path, the currently loaded form is ejected, and a form is loaded as
defined by this command. If the command is received with paper
loaded from the tractor feed path, this command is accepted but
ignored.
The ASF option on the Miscellaneous Menu of the printer control
panel must be set to “YES” for this function to operate.
Selecting a Form Format
Escape sequence: ESC DLE F x
Hexadecimal: 1B 10 46 x
The Model 8900 Series Printers offer a set of ten predefined form
formats. Each of these form formats, designated as A through J, has an
associated set of values that defines the parameters of the form. Although
these form format parameters are preset at the factory to their default
values, the user can select any of the form formats and alter its
parameters to fit any specific application. The Model 8900 Series
Printers User’s Manual, Part No. 2557785-0002, describes the preset
form format parameters and explains how to select and change them.
The Select Form Format command selects the form format designated
by the variable x, where the value of x can be any of the ten predefined
form formats A through J.