Epson 8900 Series - Manual (Page 191)

When LF NEW LINE is selected and a line feed command is received, a
carriage return is performed in addition to the line feed. Carriage
returns are also performed with vertical tabs and form feeds when LF
NEW LINE is selected.
For the NO NEW LINE selection, a carriage return only is performed
upon receipt of a carriage return control code, and a line feed only is
performed upon receipt of a line feed control code.
Note: Selection of CR NEW LINE, LF NEW LINE, or NO NEW
LINE, deselects or disables the previous selection.
Auto Wrap
This parameter, when turned on, performs an automatic new line at
the right margin if the line length of the line to be printed causes the
DEC LA120 emulation to attempt to print beyond the right margin.
When the parameter is turned off, attempts to print beyond the right
margin will cause characters to be lost.
Answerback Memory Message Load
This parameter, when turned on, allows the answerback memory to
be programmed. When turned off, answerback memory programming
is inhibited.
Optional Emulation Commands 9-6