Epson 8900 Series User Manual

Page 140

IBM Proprinter XL Emulation 7-10

Select Automatic Perforation Skip

Escape Sequence: ESC

Hexadecimal:

This command causes the printer to perform the following actions.

1. Skip the number of lines specified by the variable n and the

current form parameter settings.

2. Print the next line at the first print line position of the following

form.

The variable n can be any value in the range of 1 through 255.

Cancel Automatic Perforation Skip

Escape sequence:

ESC

Hexadecimal:

Set Left and Right Margins at Columns

n1 and n2

Escape sequence:

ESC

Hexadecimal:

This command sets the left and right margins at the positions specified
by the variables n1 and n2, respectively. The left margin position
(n1) can be at any column in the range of 1 through the column
immediately to the left of the current right margin. The right margin
(n2) can be at any column in the range of the column immediately to
the right of the left margin through 255. If n1 or n2 equals 0, the left
margin or right margin, respectively, equals the default value. The
minimum allowable distance between the left and right margin is
one-half inch.