Epson StylusPro10000 - Manual (Page 132)

6-16
6-16 | Maintaining and Transporting the Printer
2. Remove the following parts:
• Ink cartridges
• Power cord
• Interface cable
• Paper hammock
• Roll paper spindles
• All paper or other media
• Optional auto take-up reel (if installed)
• Optional manual cutter (if installed)
After you remove the ink cartridges, store them in separate, resealable
plastic bags.
3. Make sure the ink cartridge clamps and cover are closed.
4. Make sure the casters on the leg assembly are locked, and that the two
stabilizer knobs are touching the floor.
5. Remove the two wing nuts underneath the printer. Keep them in a safe
place.
Caution
Be sure that the printer
is off before you remove
the ink cartridges.
Otherwise the ink valves
may not close properly.
caster lock
stabilizer knob