Epson StylusPro10000 - Manual (Page 106)

5-2
5-2 | Monitoring and Configuring the Printer
Monitoring Normal Printer Operation
Messages appear on the control panel display and lights come on or flash to
indicate various phases of printer operation. The following table explains the
status messages and lights:
Pausing and Resetting the Printer
If you need to stop the printer during a print job, press the Pause button.
Press the Pause button again to resume printing.
If you decide to cancel a job after the printer has started processing it, you
can reset the printer. Press the
Pause button and hold it down for 3 seconds.
This clears all data in the printer’s memory.
Status messages
Message Light Explanation or response
READY Operate light on Printer is ready to print.
PRINTING Operate light flashing Printer is receiving data.
INK DRY
MIN Pause light flashing Printer is paused to let ink dry.
Wait for the number of minutes
shown.
INK CHARGING
% Pause light on or
flashing Printer is charging ink.
RESET All lights flash briefly Printer is resetting.
PRESS PAUSE
BUTTON Pause light on Press the Pause button to
continue.
WAIT Pause light on or
flashing Printer is warming up, performing
maintenance, or charging ink.
PAUSE Pause light on Printer is paused. To resume
printing, press the Pause button.
NO INK
CARTRIDGE Appears when the ink cartridge is
being replaced.
PAT PRINTING Operate light flashing
and Pause light on Print head alignment pattern is
printing.
POWER OFF Operate light flashing Printer is shutting down.