Lanner FX-3210 - Manual (Page 34)

29
Bios Settings
Chapter 4
Network Application Platforms
PC Health Status
This menu shows the hardware monitor configuration
settings. Select an item then press to display the
configuration options.
SYSIN/CPUIN/AUXIN Temperature
The onboard hardware monitor automatically detects and
displays the CPU and motherboard temperatures.
FAN1/FAN2/FAN3/FAN4 Speed
The onboard hardware monitor automatically detects
and displays the CPU , chassis and system fan speeds in
rotations per minute (RPM). If the fan is not connected to
the motherboard, it displays N/A.
CPU Voltage, 3.3V voltage, 5V voltage, 12V voltage
The onboard hardware monitor automatically detects the
voltage output through the onboard voltage regulators.
Smart Fan Mode Configuration
It allows you to configure the smart fan feature. You
can manually turn on the CPU fan or set the target CPU
temperature at which the CPU fan will start running if the
fan is not yet turned on. And the CPU fan can also be turned
off automatically if the temperature for the CPU is at or
below the specified value. Refer to Motherboard Layout on
Chapter 3 Block Diagram for CPU fan connectors.
Item Selection
Manual
Mode
Manually set the fan speed
Smart Fan
Control
set the target system temperature at which
the system fan will start running if the fan is
not yet turned on with this mode. And the
system fan can also be turned off automati-
cally if the temperature for the system is at
or below the specified value.
FCTRL5/FCTRL6 FAN Mode
The FCTRL5 is for setting the parameters for FAN2 and
FAN4 for CPU fans.
The FCTRL6 is for setting the parameter for FAN1 and FAN3
for Auxiliary fans.