Lanner FX-3210 - Manual (Page 29)

24
Bios Settings
Chapter 4
Network Application Platforms
Item Selection
Limit CPUID
Maximum
Allows legacy operating systems to boot
even without support CPUs with extend-
ed CPUID functions.
Select to enable or disable this function
Execute Dis-
able Bit
Select to enable or disable the No-Execu-
tion Page Protection Technology.
Intel Virtual-
ization
The Intel VT is a hardware-assisted virtual-
ization. This processor supports Intel Vir-
tualization. Enable or disable this feature.
Hardware
Prefetcher
The processor has a hardware prefetcher
that automatically prefetches data and in-
structions from the memory into the Level
2 cache that are likely to be required in
the near future. This reduces the latency
associated with memory reads.
When enabled, the processor’s hardware
prefetcher will be enabled and allowed to
automatically prefetch data and code for
the processor.
When disabled, the processor’s hardware
prefetcher will be disabled.
Adjacent
Cache Line P
Select to enable or disable prefetching of
adjacent line
SATA Controllers Configuration Settings
While entering Setup, the BIOS automatically detects
the presence of SATA devices. The SATA Port items show
“Empty” if no SATA device is installed to the corresponding
SATA port.
SATA Controllers
Item Selection
Enable or
Disable SATA
Controller(s) Set this value to enable or disable SATA
controllers