Lanner FX-3210 - Manual (Page 13)

8
Hardware Setup
Chapter 2
Network Application Platforms
Front Ethernet Module Installation
To install the front Ethernet module, take off the front 1.
bezel first by unfastening the threaded screws on the
bottom of the case.
Insert the Ethernet module into the front expansion
2.
slot. You should hear a click when the module connects
to the system’s mainboard.
Fasten the screw back on the bottom of the case to
3.
secure the module on the system.
1
IPMI Card Installation
To install the IPMI card, align the notch of DIMM with 1.
the slot key on the socket.
Press the card to insert the card into the socket until it
2.
snaps with the retaining clips.
1
2