Lanner FW-7540 - Manual (Page 33)

28
Bios Settings
Chapter 4
Network Application Platforms
Lan Bypass Control
In this screen, you can configure the Lan Bypass
functionality.
Lan Bypass for Port 1 and Port 2
You can activate or deactivate the Lan Bypass ports. For
the description of the physical ports that are capable of
the LAN Bypass function, refer to the Front Panel Feature in
Chapter 1 Introduction.
Lan Bypass for Port1 and Port 2 when power off
You can enable or disable the automatic activation of
hardware LAN Bypass function in the event of a power
failure. Hardware Bypass can automatically activate to
allow network traffic to continue.