Epson 4012033-00 XXX - Manual (Page 42)

Using EPSON Photo!3 2-17
R4C5700
Rev. C
A5 size PHT3.FM
4/6/01 Pass 0
R Proof Sign-off:
K. Pipa
_______
M. Fujimori _______
R. Thomson _______
2
Controlling the camera from your computer
You can change camera settings by making the
Control Options settings on the Controls menu, just as
you would use the control buttons on the top of the
camera. When the camera is connected to the
computer, you cannot make any camera settings using
the buttons on the camera itself.
The display panel on the computer and the display
panel on the camera are updated whenever the image
quality setting, flash setting, or picture count changes.
Selecting the image quality setting
To select an image quality setting, click anywhere
inside the Controls menu’s Quality list box.
You can switch freely between these settings and take
and save pictures with various quality settings on the
same CompactFlash Card. The CompactFlash Card’s
image capacity will vary accordingly. For more
information on image quality settings, see the user’s
guide for your camera.
Selecting the flash setting
To select a flash setting, click anywhere in the Controls
menu’s Flash list box. The available flash settings are
as follows: Off, Automatic, Forced, Red-eye
Reduction, Slow sync
Note:
❏
Red-eye Reduction is available only with the
PhotoPC 3000Z and PhotoPC 850Z.
❏ When taking photos in the Full Auto camera mode,
Slow sync is not available. For details, see the user’s
guide for your camera.
Image Quality Setting Resolution in Pixels
Standard 640 × 480
Fine 2048 × 1536
Super fine 2048 × 1536
HyPict 2544 × 1904
TIFF 2048 Ч 1536