Epson 4012033-00 XXX - Manual (Page 12)

Installing and Setting up the Software 1-3
R4C5700
Rev. C
A5 size INSTALL.FM
4/6/01 Pass 0
R Proof Sign-off:
K. Pipa
_______
M. Fujimori _______
R. Thomson _______
1
3. Open the connector cover on the side of the
camera. Insert the other end of the USB cable into
the interface connector. Make sure that the shape
of the cable connector corresponds to the shape of
the interface connector.
c
Caution:
Be sure to position the cable correctly before
inserting it into the connector. Otherwise, the
cable and/or the connector may be damaged.
4. Set the camera’s dial switch to and turn the
camera on (for PhotoPC 3000Z), or turn the
camera’s dial switch to
(for PhotoPC 850Z and
800).
c
Caution:
Keep your camera and computer away from potential
sources of electromagnetic interference, such as
loudspeakers or the base units of cordless telephones.
Using a serial cable
Follow the steps in the appropriate section below to
connect your camera to your computer using a serial
cable.
connector cover
PhotoPC 3000Z
PhotoPC 850Z
connector cover