Epson 4012033-00 XXX - Manual (Page 16)

Installing and Setting up the Software 1-7
R4C5700
Rev. C
A5 size INSTALL.FM
4/6/01 Pass 0
R Proof Sign-off:
K. Pipa
_______
M. Fujimori _______
R. Thomson _______
1
Installing Software for Windows Users
When you use the USB cable to connect your camera
to your computer, first install the USB driver and then
EPSON Photo!3. When you use the serial cable, you
need only install EPSON Photo!3.
Note:
Be sure to follow the installation steps in this section when
using a USB connection.
Installing the USB driver
When your camera is connected to the computer via
the USB cable, refer to the appropriate section below
to install the USB driver.
For Windows 98 and 2000 users
Follow the steps below to install the USB driver.
1. Turn on the computer.
2. Set the camera’s dial switch to and turn the
camera on (for PhotoPC 3000Z), or turn the
camera’s dial switch to
(for PhotoPC 850Z and
800).
3. The dialog box below appears. Insert the software
CD in the CD-ROM drive, then click Next
.
Note:
The screen shots of windows and dialog boxes shown
in this section are from Windows 98 except where
otherwise indicated. Their appearance may vary
slightly in Windows 2000.
4. Select Search for the best driver for your
device, then click Next.