Epson 4012033-00 XXX - Manual (Page 15)

1-6 Installing and Setting up the Software
L Proof Sign-off:
K. Pipa
_______
M. Fujimori _______
R. Thomson _______
R4C5700
Rev. C
A5 size INSTALL.FM
4/6/01 Pass 0
3. Open the connector cover on the side of the
camera. Insert the free end of the cable into the
interface connector. Make sure that the shape of
the connector corresponds to the shape of the
interface connector.
c
Caution:
Be sure to position the cable correctly before
inserting it into the connector. Otherwise, the
cable and connector may be damaged.
4. Set the camera’s dial switch to and turn the
camera on (for PhotoPC 3000Z), or turn the
camera’s dial switch to
(for PhotoPC 850Z and
800). Then turn on the computer.
c
Caution:
Keep your camera and computer away from potential
sources of electromagnetic interference, such as
loudspeakers or the base units of cordless telephones.
PhotoPC 850Z
connector cover
connector cover
PhotoPC 3000Z