Yaskawa V1000-Series Option SI-EP3/V PROFINET - Manual (Page 30)

7 Procedure B
30 YASKAWA SIEP YEACOM 06A V1000 Option PROFINET SI-EP3/V Technical Manual
11.
Reattach the lower terminal cover, (on certain models), to the drive by aligning the left and right tabs and snap
into place.
Figure 35 .
Figure 35
Figure 35 Reattach the Lower Terminal Cover
12.
Attach the option unit to the drive by aligning the two mounting tabs on left and right side of the option with slots
on the drive. Plug-in the CN5 connector on the back of the option unit into the CN5 connector on the drive.
Tighten the screw in the front of the option unit.
Figure 36 .
Figure 36
Figure 36 Attach Option Unit to Drive
CN5 Connector
port on drive
CN5 Connector
(underside of option)
Mounting Tab