Yaskawa 260IF DeviceNet System - Manual (Page 21)

Basic Specifications
2-2
2
2.1 Specifications
The basic specifications are given for the Interface Module in the following table.
Item Specifications
Name 260IF Module
Model Number JEPMC-CM230
Circuit Number 1
Applicable Communications Type I/O communications
Explicit messages
(Both conform to DeviceNet.)
I/O Communi-
cations Max. No. of Slaves 63 nodes
Max. I/O Bytes 2048 bytes, 256 bytes/node
Message
Communica-
tions
(Master Only) Max. No. of Nodes
for Message
Communications 63 nodes. Simultaneous communications possible with up to 8
nodes.
Max. Message
Length 256 bytes
Function for
Execution MSG-SND
Switches for Settings Two rotary switches on the front: for node address
DIP switch on the front: Baud rate
Master/slave selection
Indicators Two LED indicators: MS and NS
Communications Power Supply
Voltage 24 VDC±10% (supplied from a special cable)
Current Consumption Communications power supply: 45 mA max. (supplied from
the communications connector)
Internal circuit power supply (supplied from the PLC)
Mass 100 g
Dimensions (mm) 40 × 130 × 105 (W × H × D)