SMA SB 700U - Manual (Page 62)

6-14 SMA America SB700U-11:SE3207
I
Indication of an overvoltage on one
of the DC input connectors
!PV-Overvoltage!
!DISCONNECT DC !
ndication of DC Overvaltage
A too high voltage on the input (DC) side is indicated
with a blinking background illumination and the display
shown on the side.
WARNING:Disconnect the inverter from the supply
voltage immediately, otherwise it can be severely dam-
aged.
Check the input voltage and your module configuration before you reconnect the
DC voltage to the inverter again.