Section 2, Unpacking and inspection, Section 2: unpacking and inspection – SMA SB 700U User Manual
Page 15

SB700U-11:SE3207
SMA America
2-1
Section 2:
Unpacking and Inspection
All Sunny Boy inverters are thoroughly checked before they are packed and
shipped. Although they are shipped in sturdy, recyclable packaging, damage can
still occur during shipping and delivery. It is important for you to carefully inspect
the shipping container prior to beginning the installation. If you detect any external
damage to the packaging that makes you suspect the inverter itself could be
damaged, or if you find that the inverter is damaged after unpacking it, report the
damage immediately to your SMA dealer and to the shipping company that
delivered the Sunny Boy. If it becomes necessary to return the Sunny Boy, use the
original packaging in which the Sunny Boy was delivered.
WARNING:The Sunny Boy 700U weighs 16 kg (36 lb.).
To avoid injury, lift the Sunny Boy carefully, and be
careful to prevent the weight of the inverter from caus-
ing you to lose your balance and fall. If possible, have
someone help you when you unpack the Sunny Boy.
If you need assistance in dealing with a damaged Sunny Boy, contact your SMA
dealer or SMA America. Contact information for SMA America is provided below.
SMA America, Incorporated
12438-C Loma Rica Drive
Grass Valley, California 95945
Tel 530.273.4895
Fax 530.274.7271
www.sma-america.com