SMA SB 700U - Manual (Page 52)

6-4 SMA America SB700U-11:SE3207
Stopped
The inverter has stopped operating while there is sufficient power available to
calibrate its internal systems. Typically, the calibration lasts less than 10 seconds
and then the inverter resumes normal operation.
This status can also be adjusted manually (operating mode „Stop“)
Waiting
The inverter has determined that there is enough power from the array to operate
and is checking the condition of the grid in preparation to connect to it.
Note:If the inverter fails to connect to the utility grid 3
times in a row, it will wait 10 minutes before the next
attempt.