9 maintenance and care, 1 safely removing the micro sdhc card, 2 performing an update – SMA VIEW-10 User Manual
Page 37

SMA Solar Technology AG / SMA America, LLC
9 Maintenance and Care
User Manual
SunnyView-BA-en-13
37
9 Maintenance and Care
9.1 Safely Removing the Micro SDHC Card
Always remove the micro SDHC card as follows:
Procedure:
1. Call up the menu using .
2. In the lower section of the menu, select Safely remove the SDHC card.
☑ The message "The SDHC card can now be removed." appears.
3. Remove the micro SDHC card
9.2 Performing an Update
Perform an update so that the Sunny View can download the latest data. When the Sunny View is
updated, all PV plant data and display settings will be saved.
Necessary equipment:
☐ Computer with Internet connection and a micro SDHC card slot
☐ microSDHC card with a maximum memory capacity of 8 GB
Procedure:
1. If you have not yet performed an update using the micro SDHC card, you must connect the
micro SDHC card to the computer and create a folder labeled UPDATE on the micro
SDHC card.
2. Download the update file in the download area of www.SMA-Solar.com and then save it on
the micro SDHC card in the "UPDATE" folder.
3. Remove the micro SDHC card from the computer.
4. Push the micro SDHC card into the slot on the Sunny View.
5. Select > Settings > Service > Update.
☑ The following message appears: "New update file found on the SDHC card. Do you
wish to start the update?"
✖ Is the message not shown?
The microSDHC card was not recognized.
• Ensure that the microSDHC card is inserted correctly in the card slot of the Sunny View.
• Perform the update again.
Damage to the micro SDHC card
If the micro SDHC card is removed while data is being written to it, it can be damaged and data
can be lost.
• Safely removing the micro SDHC card