SMA VIEW-10 - Manual (Page 35)

SMA Solar Technology AG / SMA America, LLC 8 Settings Menu Item
User Manual SunnyView-BA-en-13 35
8.18 Checking and Setting Up a Bluetooth Connection
The connection of the Sunny View to your PV plant is established via Bluetooth. You can check the
quality of your Bluetooth connection and the NetID, and set how often the Sunny View PV plant data
is updated.
Procedure:
1. Select > Settings > Wireless > Bluetooth.
☑ The quality of the Bluetooth connection and the NetID is displayed.
2. Using the drop-down list "Refresh after", set how often the Sunny View online data is updated
from the Internet. If you have more than six inverters, select a time period greater than five
minutes.
3. If you do not wish to configure any other settings, select .
8.19 Configuring Online Data
1. Select > Settings > Slide show > Online data.
2. If you want a newsfeed:
• Enable the Newsfeed checkbox.
• Type the Internet address of the RSS feed or Atom feed in the "URL" text box.
3. If you want to display the weather:
• Enable the Weather checkbox.
• Enter the location and/or the country in the input field and confirm the search result by
selecting it.
4. If you do not wish to configure any other settings, select .
8.20 Changing the Duration of the Slide Show
The slides in the slide show change after a preset display time.
Procedure:
1. Select > Settings > Slide show.
2. Select the desired display time in the "Slide duration" drop-down list.
3. If you do not wish to configure any other settings, select .
Radio range indoors
The radio range indoors depends on absorbent materials (e.g. walls) between the devices
with SMA Bluetooth. In free-field conditions (i.e. without any obstacles), a radio range of up
to 328 ft (100 m) can be achieved, whereas indoors it may be reduced to a few meters
only. It is therefore not possible to specify the indoor radio range precisely. Tip: To improve
the radio range, use one or more SMA Bluetooth Repeaters as required.