8 setting the country settings, 9 setting the date and time – SMA VIEW-10 User Manual
Page 30

8 Settings Menu Item
SMA Solar Technology AG / SMA America, LLC
30
SunnyView-BA-en-13
User Manual
8.8 Setting the Country Settings
1. Select > Settings > General > International > Country.
2. Select a country.
3. Check the country settings. Change the country settings if necessary.
Tip: Press the [Reset] button to restore the default country settings.
4. Select [Next].
5. If you do not wish to configure any other settings, select .
8.9 Setting the Date and Time
The Sunny View can synchronize the time automatically when a WLAN connection is available
(see Section 8.17 "Setting up a WLAN Connection", page 34) and the Automatic checkbox is
activated.
You can choose between a 12-hour or 24-hour time format by selecting the "24-hour format"
checkbox accordingly.
Procedure:
1. Select > Settings > General > Date & time.
2. In the field "Time zone", select the desired time zone.
3. In the field "Date", select the date.
4. Set the date using [+] and [-].
5. Select [Accept].
6. In the field "Time", select the time.
7. Set the time using [+] and [-].
8. Select [Set].
9. If you do not wish to configure any other settings, select .
Diagrams may be incorrectly displayed
Changing the set time while the inverters are feeding in can cause diagrams to be displayed
with permanent errors.
• Only change the set time when the inverters are not feeding in (e.g., when it is dark).