21 selecting photovoltaics visualization, 22 activating demo mode, Tion rate (see section 8.21) – SMA VIEW-10 User Manual
Page 36

8 Settings Menu Item
SMA Solar Technology AG / SMA America, LLC
36
SunnyView-BA-en-13
User Manual
8.21 Selecting Photovoltaics Visualization
Sunny View shows the slide show only with slides that you have selected. For some slides you will
need to specify additional information using the text boxes, drop-down menus and sliders. Tap the
Info icon for more information. You will find an overview of the slides in the "PV plant data" section
(see Section 5.3).
Procedure:
1. Select > Settings > Slide show > PV visualization.
☑ A list of all slides will open.
2. Select and enable the slides you want to display.
3. If you do not wish to configure any other settings, select .
8.22 Activating Demo Mode
The demo mode simulates the process of operating a PV plant. It can therefore be used to demonstrate
how the Sunny View is operating. The Sunny View simulates a PV plant with a power of 4.5 kWp.
If the country setting is set to Japan, the Sunny View will also simulate an SMA CT Meter.
Activating Demo Mode After Commissioning
Requirement:
☐ The Sunny View must not be connected to a PV plant.
Procedure:
1. Select > Settings > PV plant > New search > PV plant search.
2. Select [Demo mode].
3. If you do not wish to configure any other settings, select .