13 changing the device name, 14 what to do in case of a lost pv plant password, 15 changing the pv plant password – SMA VIEW-10 User Manual
Page 33

SMA Solar Technology AG / SMA America, LLC
8 Settings Menu Item
User Manual
SunnyView-BA-en-13
33
8.13 Changing the Device Name
The default name of the device is the serial number of the inverter. You can assign a unique name to
the device.
Procedure:
1. Select > Settings > PV plant > Information.
2. Select the desired device.
3. Select [Device name].
4. Enter a device name.
5. Select [Next].
8.14 What to Do in Case of a Lost PV Plant Password
If you forget the PV plant password, contact the SMA Service Line. You will be given a personal
unlocking key (PUK) for each device, which can then be used to unblock the device. After you enter
the PUK, the password for each device must be changed to a shared PV plant password
(see Section 8.15). If you are not the PV plant owner, you must communicate the new password to
the PV plant owner.
8.15 Changing the PV Plant Password
The PV plant password is used for all devices in the PV plant to prevent unauthorized access.
The PV plant password can have a maximum of twelve characters. The password may contain the
following characters: A to Z, a to z, 0 to 9, ? , _ , ! and - .
Procedure:
1. Select > Settings > PV plant > PV plant password.
2. Enter a new password in the "Set password" and "Confirm password" text boxes.
3. Select [Accept].