4 setting the error alert, 5 setting the key clicks, 6 identifying the sunny view – SMA VIEW-10 User Manual
Page 29: 7 setting the language

SMA Solar Technology AG / SMA America, LLC
8 Settings Menu Item
User Manual
SunnyView-BA-en-13
29
8.4 Setting the Error Alert
There is an error alarm when an error occurs. If the error is not eliminated, there will be another error
alarm after a preset interval.
Procedure:
1. Select > Settings > General > Sounds.
2. To enable the error alert, enable the Error alert checkbox.
3. To disable the error alert, disable the Error alert checkbox.
4. Select the repetition interval for the error alert in the "Alarm sounds every" drop-down list.
5. Drag the volume slider to the left or right until you reach the desired volume.
6. Select the desired alarm tone in the "Alarm tone" drop-down list.
7. If you do not wish to configure any other settings, select .
8.5 Setting the Key Clicks
1. Select > Settings > General > Sounds.
2. To enable the key clicks, activate the Key clicks checkbox.
3. To disable the key clicks, deactivate the Key clicks checkbox.
4. Drag the volume slider to the left or right until you reach the desired volume.
5. If you do not wish to configure any other settings, select .
8.6 Identifying the Sunny View
1. Select > Settings > General > Information.
☑ A list containing the following information opens:
– Serial number
– Firmware version
– Hardware
– Bluetooth version
– WLAN Mac ID
2. To return to the menu, select .
8.7 Setting the Language
1. Select > Settings > General > International > Language.
2. Select the desired language.
3. If you do not wish to configure any other settings, select .