2 security, 1 intended use, 2 safety precautions – SMA VIEW-10 User Manual
Page 11: 1 intended use 2.2 safety precautions

SMA Solar Technology AG / SMA America, LLC
2 Security
User Manual
SunnyView-BA-en-13
11
2 Security
2.1 Intended Use
The Sunny View is a communication device that receives, displays and stores data from
SMA inverters.
The Sunny View is only suitable for indoor use.
For safety reasons, it is not permitted to modify the product or install components that are not explicitly
recommended or distributed by SMA for the product. Unauthorized modifications and installations
are not permitted and will void all warranty claims. Any use of the product other than described in the
Intended Use section does not qualify as appropriate.
The type label must remain permanently attached to the product.
The data collected by Sunny View on the amount of power generated by your PV plant may deviate
from the energy meter data. The Sunny View data must not be used for billing purposes.
Use the Sunny View only in accordance with the enclosed documentation and with the local
standards and directives. Any other application may cause personal injury or property damage.
• The Sunny View is only to be operated using the supplied plug-in power supply and in the
intended voltage range (see Section 12 "Technical Data", page 46).
The enclosed documentation and the documentation on the CD-ROM are an integral part
of this product. Keep the documentation in a convenient place for future reference and
observe all instructions contained therein.
Radio Frequency Exposure
This product should be installed and operated with a minimum clearance of 20 cm (8 in.) from your
body.
2.2 Safety Precautions
Magnetic components in the Sunny View can damage sensitive objects
The Sunny View contains magnetic components, e.g. loudspeakers.
• You should not place any objects which are sensitive to magnets (e.g. EC cards) on the
Sunny View.
Preventing unauthorized access
PV plants are delivered with "0000" as default password. This means that unauthorized users
can gain access to the data of the PV plant.
• Change the default plant password (see Section 8.15).