8 settings menu item, 1 adjusting the brightness of the display, 2 disabling the display – SMA VIEW-10 User Manual
Page 28: 3 setting the scaling of the daily graph

8 Settings Menu Item
SMA Solar Technology AG / SMA America, LLC
28
SunnyView-BA-en-13
User Manual
8 Settings Menu Item
8.1 Adjusting the Brightness of the Display
1. Select > Settings > General > Display.
2. Drag the brightness slider to the right or left to adjust the brightness to the desired level.
8.2 Disabling the Display
You can disable the display or configure the settings in such a way that it disables automatically after
a preset time. When disabled, the display is switched off. This means, the Sunny View requires less
electric current.
Procedure:
1. Select > Settings > General > Display.
2. Set the desired time period for disconnection.
3. If you would like to disconnect after a preset time:
• Activate the Off after option.
• Select the desired time in the appropriate drop-down list.
4. If you do not wish to configure any other settings, select .
☑ After the preset time, the display will be disabled.
5. Simply touch the display to re-enable it.
8.3 Setting the Scaling of the Daily Graph
You can choose between static or dynamic scaling for the daily graph. If static scaling is selected, the
graph can be scaled to a set maximum threshold (e.g., the maximum power of your PV plant). With
dynamic scaling, the maximum thresholds of the measured values are used as the basis for scaling.
Procedure:
1. Select > Settings > General > Display.
2. If you prefer static scaling for the daily graph:
• Enable the Static option.
• Enter the power of your PV plant in the appropriate text box.
Tip: You can reset the scaling to match the maximum power of your plant's inverter by pressing
the [Reset to nominal PV plant power] button. This value can deviate from the actual
maximum power of your PV plant.
3. If you prefer dynamic scaling for the daily chart, enable the Dynamic option.
4. If you do not wish to configure any other settings, select .