SMA SC 500CP-10-JP Mounting Instructions - Manual (Page 21)

SMA Solar Technology AG 6 Assembly
Mounting Instructions SCCP-JP-MA-Silence-en-10 21
3. Insert five pan head flange screws into the upper threads of the lid.
Do not tighten the screws yet.
4. Fasten the ventilation plate on the rear panel of the silencing baffle
to the lid. Do not tighten the five pan head flange screws yet.
5. Screw two hexagon nuts with contact washers onto the bottom
right and left stud bolts of the rear panel.
6. Screw all hexagon nuts and washers onto the remaining stud bolts
of the rear panel.
7. Align the lid and tighten all bolts and nuts (torque: 8 Nm).