SMA SC 500CP-10-JP Mounting Instructions - Manual (Page 20)

6 Assembly SMA Solar Technology AG
20 SCCP-JP-MA-Silence-en-10 Mounting Instructions
Procedure:
1. Align the rear panel of the silencing baffle on the rear panel of the
inverter.
2. Insert two cylinder head screws with contact washers into the
middle threads of the rear panel. The rear panel of the silencing
baffle should still be loose.
Mounting the Lid of the Silencing Baffle
Required mounting material:
☐ 1 cylinder head screw
☐ 3 contact washers
☐ 9 pan head flange screws
☐ 13 washers
☐ 10 hexagon nuts
Procedure:
1. Align the lid on the rear panel. The lid should be over the stud bolts.
2. Insert a cylinder head screw with contact washer into the top left
thread. Do not tighten the screw yet.