HEIDENHAIN IK 5293 - Manual (Page 78)

64
Chapter 4 General Measuring
NOTE NOTE NOTE NOTE NOTE
Use the following procedure if the QC5000 software is already Use the following procedure if the QC5000 software is already Use the following procedure if the QC5000 software is already Use the following procedure if the QC5000 software is already Use the following procedure if the QC5000 software is already
running and machine zero is not set.
running and machine zero is not set. running and machine zero is not set. running and machine zero is not set. running and machine zero is not set.
Step 1
Select options, then general options, from the tools menu.
Step 2
Select the general tab in the general options window.
NOTE NOTE NOTE NOTE NOTE
If the general tab is greyed out, enter the supervisor password If the general tab is greyed out, enter the supervisor password If the general tab is greyed out, enter the supervisor password If the general tab is greyed out, enter the supervisor password If the general tab is greyed out, enter the supervisor password
on the supervisor tab.
on the supervisor tab. on the supervisor tab. on the supervisor tab. on the supervisor tab.