HEIDENHAIN IK 5293 - Manual (Page 4)

Proprietary notice
All information set forth in this document, all rights to such informa-
tion, any and all inventions disclosed herein and any patents that might
be granted by employing the materials, methods, techniques or apparatus
described herein are the exclusive property of Metronics Incorporated,
Bedford, New Hampshire.
No part of this document may be reproduced, stored in a retrieval sys-
tem, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without the prior permission of
Metronics Incorporated. The information contained herein is designed
only for use with the Quadra-Chek 5000 Metrology Software. Metronics
Incorporated is not responsible for any use of this information as applied
to any other apparatus.
Disclaimer
The information contained in this document is subject to change with-
out notice. Metronics Incorporated assumes no responsibility or liability
for any errors or inaccuracies contained herein, or for incidental or conse-
quential damage in connection with the furnishing, performance, or use
of this guide.
Metronics Inc. shall not be liable to the purchaser of this product or third
parties for damages, losses, costs, or expenses incurred by the purchaser
or third parties as a result of: accident, misuse, or abuse of this product or
unauthorized modifications, repairs, or alterations to this product, or fail-
ure to strictly comply with Metronics Incorporated’s operating and main-
tenance instructions.
Trademarks
Metronics, Quadra-Chek, Quadra-Chek 5000, and QC5000 are regis-
tered trademarks of Metronics Incorporated.
Other product names used herein are for identification purposes only
and may be trademarks of their respective owners. Metronics Incorpo-
rated disclaims any and all rights to those marks.
Printing History
April 2001 First Printing
Revision 1.0
Part Number: 11A10516
Software Version 2.2
Printed in the USA.