HEIDENHAIN IK 5293 User Manual

Page 350

336

Chapter 8 Setup

Step 5
Disconnect the malfunctioning axis cable and connect it to one of the properly
calibrating axis ports. For example, if the X axis calibrates properly and the Y
does not, connect the Y axis to the X axis port.

Step 6
Turn on the computer and open encoder setup.

Step 7
Calibrate the desired axis. For example, if you have moved the Y axis cable to
the X axis, calibrate the X axis.

NOTE

Discontinue troubleshooting and contact your distributor/OEM

Discontinue troubleshooting and contact your distributor/OEM
if the axis will not calibrate properly

if the axis will not calibrate properly

if the axis will not calibrate properly. There is an error on the

. There is an error on the

CMM/encoder side of the system that may require repair

CMM/encoder side of the system that may require repair.....

NOTE

Discontinue troubleshooting and contact your distributor/OEM

Discontinue troubleshooting and contact your distributor/OEM
if the axis calibrates properly

if the axis calibrates properly

if the axis calibrates properly. There is an error on QC5000 axis

. There is an error on QC5000 axis

port that may require repair

port that may require repair.....