HEIDENHAIN TNC 640 (34059x-04) Cycle programming - Manual (Page 294)

Cycles: Turning
13.1 Turning Cycles (software option 50)
13
294
TNC 640 | User's Manual Cycle Programming | 3/2014
13.1 Turning Cycles (software option 50)
Overview
Defining turning cycles:
The soft-key row shows the available groups of cycles
Select the menu for cycle group
TURNING
Select cycle group, e.g. cycles for longitudinal turning
Select cycle, e.g. TURN SHOULDER, LONGITUDINAL
The TNC offers the following cycles for turning operations:
Cycle group Cycle Soft key Page
Special Cycles
ADAPT ROTARY COORDINATE SYSTEM(Cycle 800,
DIN/ISO: G800) 300
RESET ROTARY COORDINATE SYSTEM (Cycle 801,
DIN/ISO: G801) 306
Cycles for longitudinal
turning
307
TURN SHOULDER LONGITUDINAL (Cycle 811,
DIN/ISO: G811) 308
TURN SHOULDER LONGITUDINAL EXTENDED
(Cycle 812, DIN/ISO: G812) 310
TURN, LONGITUDINAL PLUNGE (Cycle 813, DIN/
ISO: G813) 314
TURN, LONGITUDINAL PLUNGE EXTENDED
(Cycle 814, DIN/ISO: G814) 317
TURN CONTOUR LONGITUDINAL (Cycle 810, DIN/
ISO: G810) 321
TURN CONTOUR-PARALLEL (Cycle 815, DIN/ISO:
G815) 325