HEIDENHAIN TNC 620 (81760x-02) Cycle programming User Manual
Page 350
Touch Probe Cycles: Automatic Datum Setting
14.7 DATUM FROM OUTSIDE OF CIRCLE (Cycle 413, DIN/ISO: G413,
software option 17)
14
350
TNC 620 | User's Manual Cycle Programming | 2/2015
Probe TS axis: Coord. 3rd axis Q384 (absolute):
Coordinate of the probe point in the touch probe
axis, at which point the datum is to be set in the
touch probe axis. Only effective if Q381 = 1. Input
range -99999.9999 to 99999.9999
New datum in TS axis Q333 (absolute): Coordinate
in the touch probe axis at which the TNC should
set the datum. Default setting = 0. Input range
-99999.9999 to 99999.9999
No. of measuring points (4/3) Q423: Specify
whether the TNC should measure the stud with 4 or
3 probing points:
4
: Use 4 measuring points (default setting)
3
: Use 3 measuring points
Type of traverse? Line=0/Arc=1 Q365: Definition
of the path function with which the tool is to move
between the measuring points if "traverse to
clearance height" (Q301=1) is active:
0
: Move in a straight line between machining
operations
1
: Move in a circular arc on the pitch circle diameter
between machining operations