HEIDENHAIN ND 281 B v.2 - Manual (Page 60)

60
Remote
Operation
over
the
RS-232-C/V.24
Data
Interface
Remote Operation over the RS-232-C/V.24
Data Interface
You can operate the display unit remotely over the RS-232-C/
V.24 data interface. The following commands are available on
the ND 281 B:
Format:
TXXXX Pressed key
AXXXX Output of screen contents
FXXXX Execute function
SXXXX Special function
Sequence of commands Meaning
T0000 ‘0‘ key
T0001 ‘1‘ key
T0002 ‘2‘ key
T0003 ‘3‘ key
T0004 ‘4‘ key
T0005 ‘5‘ key
T0006 ‘6‘ key
T0007 ‘7‘ key
T0008 ‘8‘ key
T0009 ‘9‘ key
T0100 ‘CL' key
T0101 ‘-‘ key
T0102 ‘.‘ key
T0104 ‘ENT‘ key
T0105 ‘MOD‘ key
T0107 ‘1/2‘ (datum) key
Sequence of commands Meaning
T1000 ‘CE+0‘ keys
T1001 ‘CE+1‘ keys
T1002 ‘CE+2‘ keys
T1003 ‘CE+3‘ keys
T1004 ‘CE+4‘ keys
T1005 ‘CE+5‘ keys
T1006 ‘CE+6‘ keys
T1007 ‘CE+7‘ keys
T1008 ‘CE+8‘ keys
T1009 ‘CE+9‘ keys
A0000 Output of model designation
A0100 Output of 14-segment display
A0200 Output of current value
A0301 Output of error text
A0400 Output of software number
A0900 Output of status indicators
F0000 REF function
F0001 Start measurement 1)
F0002 Print
S0000 Counter RESET
S0001 Lock keypad
S0002 Release keypad
1) Only in the linear measurement mode.