HEIDENHAIN ND 281 B v.2 - Manual (Page 51)

51
With the ENT key, you transmit the
compensation value list over the RS-232-C/
V.24 interface. After transmission, return to
the beginning ("TRANSFER") to transmit or
receive more lists. Continue in the data
transfer menu with the decimal point key.
Press the ENT key if you want to transmit
the parameter list over the RS-232-C/V.24
interface. After transmission, return to the
beginning ("TRANSFER") to transmit or
receive further lists. Press the decimal
point key to continue in the data tranfer
menu.
Input/Output of Parameter and Compensation-Value
Lists
Calling the "data transfer" function:
Select the operating parameters.
together
with
Select P00 CODE.
MOD
Enter the code number 48 61 53 and
confirm with ENT.
Data transfer function:
TRANSFER
SEND PARAM.
If
reqd.
or
Continue with ENT.
REC. PARAM.
The display unit is ready to receive a
parameter list over the RS-232-C/V.24
interface. After successful reception of the
parameter list, the display unit resets itself
and restarts. Continue in the data transfer
menu with the decimal point key. If
reqd.
or
SEND COMP.
If
reqd.
or
REC. COMP.
The display unit is ready to receive a
parameter list over the RS-232-C/V.24
interface. After successful reception, return
to the beginning ("TRANSFER") to transmit or
receive more lists. Continue in the data
transfer menu with the decimal point key. If
reqd.
or
Exit the data transfer function.
Input/Output
of
Parameter
and
Compensation-Value
Lists
P00 CODE