Grass Valley RSE1 - Manual (Page 37)

RSE 1 Stand-Alone Controller
32 Rev. 1 / 02.2002
6.3 LIST OF DEFAULT MACROS
The following list contains all available macros. You are also able to save your own
macros and load them as default. For further details refer to the RSAT Manuals.
Note:
All macros are specified for one RSAT panel type, e.g. RSAT1 or RSAT2 panel.
The names of the macros for the RSAT1 panel begin with 1xxxxxxx.sat and
for the RSAT2 panel with 2xxxxxxx.sat, see table below.
Macros for RSAT1 panel Macros for RSAT2 panel
1_me1ky1.sat 2_pp_24.sat
1_me1ky2.sat 2_me1_24.sat
1_me1ky3.sat 2_me2_24.sat
1_me1mem.sat 2_me3_24.sat
1_me1trn.sat 2_pp_32.sat
1_me2ky1.sat 2_me1_32.sat
1_me2ky2.sat 2_me2_32.sat
1_me2ky3.sat 2_me3_32.sat
1_me2mem.sat 2pp_24ml.sat
1_me2trn.sat 2m1_24ml.sat
1_me3ky1.sat 2m2_24ml.sat
1_me3ky2.sat 2m3_24ml.sat
1_me3ky3.sat 2pp_32ml.sat
1_me3mem.sat 2m1_32ml.sat
1_me3trn.sat 2m2_32ml.sat
1_medel.sat 2m3_32ml.sat
1_mntpr1.sat
1_mntpr2.sat
1_mstmem.sat
1_ppdsk1.sat
1_ppdsk2.sat
1_ppdsk3.sat
1_ppdsk4.sat
1_ppdsk5.sat
1_ppdsk6.sat
1_ppmemo.sat
1_pptrns.sat
1_tape1.sat
1_tape2.sat
1_tape3.sat
1_tape4.sat
1_vstore.sat
Note:
All macro names are case sensitive! Only use small letters.