Grass Valley Maestro Master Control Branding Engine v.1.6.0 - Manual (Page 61)

Maestro — Branding Engine Quick Start Guide 61
Section
3
Content Configuration
This section describes the process of making branding elements available
for use on Maestro channels. Before proceeding with the configuration and
deployment of branding elements, the following (as described in the pre-
ceding sections) must be done:
• The Branding Engine mezzanine board and hard drive(s) must be prop-
erly installed on the Maestro Processor board.
• The Content Gateway must be installed.
• The Branding Elements must be stored in the Content Gateway.
Content Definition Table
Branding elements to be used in Maestro are defined in the Configuration
Editor Branding Content Definition table as illustrated in
Figure 38 and
Figure 39 .
Note Multiple Content Definition tables may be created in order to accommodate
different video output standards or different content sets for different chan-
nels. Content definitions are not assigned directly to channels; however, they
contain the sources from which branding inputs are made available to a
Maestro channel.