Grass Valley Maestro Master Control Branding Engine v.1.6.0 - Manual (Page 51)

Maestro — Branding Engine Quick Start Guide 51
Mounting and Formatting Drives
Figure 28. Drive Mount and Activity LEDs
If the mounted drive was received from Grass Valley, proceed to Installing
the Content Gateway on page 54 . Partitioning and formatting the drive is
only necessary if replacing a Grass Valley supplied drive.
Partitioning and Formatting a Drive
Note Partitioning and formatting a drive is necessary only if replacing a drive pro-
vided by Grass Valley. Drives received from Grass Valley have been parti-
tioned, formatted and tested prior to shipment.
Once a drive has been installed and mounted, it must be partitioned and
formatted in order for the Content Gateway to create the necessary folders
and then copy the branding elements to those folders .
To partition and format a drive, do the following:
1. Initiate a Telnet session to the IP address of the Maestro Processor board
on which the drive is mounted.
2. At the prompt, type “devs” to display all devices.
All mounted drives will then appear in the list as illustrated in Figure 29 .