Grass Valley Maestro Master Control Branding Engine v.1.6.0 - Manual (Page 52)

52 Maestro — Branding Engine Quick Start Guide
Section 2 — Hardware Installation
Figure 29. Maestro Processor Device List
3. At the prompt, enter the command (without the quotation marks)
“altaDiskPart X’ where X is the ata disk number. Disk numbers can be
0-3.
Note The command is case sensitive and must be entered as shown above.
A confirmation prompt will appear. If this prompt does not appear, re-enter
the command.
4. Enter “y” at the confirmation prompt to proceed with partitioning and
formatting
When partitioning and formatting is complete, the status information is
then displayed. See
Figure 30 .