Grass Valley Maestro Master Control Branding Engine v.1.6.0 User Manual
Page 31
Maestro — Branding Engine Quick Start Guide
31
Software Upgrade Procedure
The Software Application box contains two buttons:
Update Only
and
Update
and Apply
.
•
Update Only
- Downloads the selected configuration file to the
boards, but, does not apply it as the running configuration. The
selected configuration files appears in the “Pending>>” row.
The currently active configuration appears in the “Running>>”
rows.
•
Update & Apply
- Downloads the selected configuration file to the
boards and applies it as the running configuration.
CAUTION The following step will interrupt the video and audio signals passing through
the system for about 1 minute.
7.
Click the
Update & Apply
button.
This action will update the contents of the “Running>>” rows in the
Version columns and activate the application, FPGA and OS code.
Note
If the Update Only button is clicked, the software application file does not
become the active software application until the Apply Pending button is
clicked to activate the “pending” software application.
8.
Click the
Apply Pending
button to activate the pending configuration and
make it the “Running” configuration.
9.
Verify that the new Configuration and Application versions are
“Running” as seen in
.
10.
Proceed to