Grass Valley Maestro Master Control Branding Engine v.1.6.0 - Manual (Page 39)

Maestro — Branding Engine Quick Start Guide 39
Section
2
Hardware Installation
This section describes the procedures for installing the Branding Engine
hardware which includes the Branding Engine mezzanine board and disk
drives.
CAUTION Before proceeding with the hardware installation, the software installation
procedures documented in the previous section must be followed. Of partic-
ular importance is
Checking the Boot ROM Versions on page 20 . The boot
ROM must be the current version or the Maestro processor board may not
start properly with the Branding Engine Hardware installed.
Branding Engine Board Installation
To install the Branding Engine mezzanine board on the Maestro frame pro-
cessor board, do the following:
1. Locate the box in which the Branding Engine board(s) and software
were shipped.
2. Open the box and remove the contents.
The box contains two suspension trays and an anti-static bag which will be
used in the installation process. See
Figure 13 .