Grass Valley M-2100 - Manual (Page 79)

MMCP Installation/Operation Manual 2-55
Audio Controls and Operation
The monitor levels are associated with the monitor, and not the Audio Pro-
cessor, nor PGM/PST or Off-Air sources. Thus, if the volume of Monitor 1
was turned down for Preset on Audio Processor 2, selections of PGM and/
or Audio Processor 1 would not change the effective monitor volume.
DIM Buttons
The DIM buttons provide an attenuation of a configurable amount of the
level of the associated monitor. These buttons are either off or high tally
(On meaning monitor level attenuated). They are toggle action selected on
the leading edge of the button press. Like the other controls and buttons,
these belong to Monitor 1, and not the source or Audio Processor. Thus a
change of source or Audio Processor cannot change the state of these but-
tons.
The attenuation level of the DIM buttons is set using the General Parameters
form in Configuration Manager. Enter a dB value into the Audio Monitor Dim
Attenuation field in this form. Refer Configuration Manager in the Installa-
tion and Service Manual.