Grass Valley M-2100 - Manual (Page 53)

MMCP Installation/Operation Manual 2-29
Keyer Controls and Operation
2. Adjust the matte using the Brightness , Hue , and Saturation potentiometers
(while holding down the Mode/Function button.
3. Continue to press and hold the Mode/Function button.
4. Press and release the Matte button.
5. Release the Mode/Function button and the new matte values are now
stored as the defaults.
These default settings can be stored in the database on the Configura-
tion Manager GUI PC for later recall by transferring the configuration
from the FCM to the Configuration Manager.
To recall the currently configured matte defaults to the selected keyer, the
keyer must be in modify mode. Perform the following steps:
1. Press and hold the Mode/Function button.
2. Press the Keyer button to which you want to recall the default. The matte
color will be set to the default value. All keyer defaults will be recalled,
including the default matte values.
Note The matte enabled may not be the default value.