Power supply – Grass Valley 2000T3 User Manual
Page 41
Kameleon Frames Instruction Manual
41
Power Supply
Power Supply
See
for a list of power supply specifications. Specifications are
subject to change without prior notice.
Table 5. 2000PS Power Supply Specifications
Parameter
Value
Inputs
Voltage range
90 to 132 V, 180 to 264 V, single phase
Frequency
47 Hz to 63 Hz
Input power
240 W maximum
Line current max. load
6.6 A with power to both power supplies on the sled
Inrush current
Maximum 40 A at 264 VAC at cold start
Outputs
Voltage/current
+23.75 V @ 9.17 A
Load range
0.0 to 9.17 A for +24 V
Load/line regulation
± 1% for loads from nominal to maximum
.3% varying line voltage from 90 to 132 VAC and 180 to 264 VAC at full
load.
Over voltage protection
Limit at 30 V ±2 V
Overshoot
Less than 3%
Power factor correction
Complies with EN61000-3-2 Class D
Table 6. 2000PS1D Power Supply Specifications
Parameter
Value
Inputs
Voltage range
90 to 132 V, 180 to 264 V, single phase
Frequency
47 Hz to 63 Hz
Input power
130 W maximum
Line current max. load
Inrush current
Maximum 40 A at 264 VAC at cold start
Outputs
Voltage/current
+23.75 V @ 5.4 A
Load range
0.0 to 5.4 A for +24 V
Load/line regulation
± 1% for loads from nominal to maximum
Over voltage protection
Limit at 30 V ±2 V
Overshoot
Less than 3%
Power factor correction
Complies with EN61000-3-2 Class D