Grass Valley 2000T3 - Manual (Page 16)

16 Kameleon Frames Instruction Manual
Section 1 — Kameleon 2000 Series Frames
Module Slots
2000T3 frame model architecture allows for up to 12 media modules in the
front slots shown in
Figure 1 . The front modules connect to rear I/O
modules that allow selection of various connector types. The 2000T1 frame
models have four front and four rear module slots.
Note Some rear modules are dual height and require 2 slots. This will affect the
number of actual modules that can be installed in the frame. Refer to the spe-
cific module manual for more information.
Figure 1. 2000T3 and 2000T1 Frame Slots
The rear slots ( Figure 2 ) accept either passive I/O connector modules (ded-
icated to front modules) or standalone active rear-slot media modules. The
center section houses network and timing reference modules.
Note In the 2000T3 frame, center slots 14, 16, 17, and 18 are not functional. Even
though some versions of the frame have board-edge guides for these slots,
they should not be used.
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(15)
(13) (1)
8039-04
Network Slot (13)
Reference Distribution Slot (15)
Main Power Supply Slot (19)
Redundant Power
Supply Slot (21)
Front Media Slots (1-12)
Slot (20)
(2)
(3)
(4)
(5)
(6)
(1)
8039-21
Network Slot (5) Power Supply Slot (7)
Front Media Slots (1-4)
2000T3
2000T1