Grass Valley 2000T3 - Manual (Page 22)

22 Kameleon Frames Instruction Manual
Section 1 — Kameleon 2000 Series Frames
2000T1 Frame Connections
The rear of the 2000T1 frame provides four rear media or passive I/O
module slots that support various combinations of connectors for
input/output functions. Specific input/output functions are determined
by the module type installed (see
Figure 6 ). Some modules require two
slots. 2000EMI blanks can be installed in unused cell locations.
Figure 6. 2000T1 Module I/O Connectors
The power section of the frame provides:
• AC power plug connections and cord retention clip.
The network and reference connection section provides:
• Ethernet RJ-45 connector (J101), and
• Reference input BNC (J102) internally terminated into 75 Ω.
Power, Cooling, and Module Capacity
The 2000T3 frame and the optional fan module provide a great deal of flex-
ibility in the type of modules that can be installed. The frame can support
both conventional low power analog DAs and higher power serial digital
modules with all modules performing to their full specifications.
Note The maximum number of modules shown reflects the cooling capacity of the
power supply/fan configuration rather than the power capacity of the power
supplies. Module capacity figures assume no other media modules are in the
frame.
8039-20r1
Media section
rear slots 1-2
J101
1
2
3
4
J102
Media section
rear slots 3-4
(with 2000EMI blank) Network
and reference
input connections
Power connections