Grass Valley 2000T3 - Manual (Page 27)

Kameleon Frames Instruction Manual 27
Rack Mounting the Frame
Grounding
The 2000T3 frame provides a frame grounding post below the AC plug
receptacles. To ground the 1 RU 2000T1 frame, remove the existing pan
head screw on the power supply side of the frame (see
Figure 8 ) and attach
a ground cable using a 10 mm machine screw (provided with rear frame
support hardware). The ground cable may be installed with the rear
support plate as shown or directly to the frame if the support option is not
used.
Figure 8. Grounding the 2000T1 Frame
Ground cable
(user-supplied, place on
power supply side of frame)
Frame rear support plate
8039 -23
Existing support screw is replaced
with a pan-head screw included in
the frame support package