Grass Valley Kaleido Remote Control Protocol Gateway Jan.09 2014 - Manual (Page 7)

3
Kaleido Remote Control Protocol (Gateway)
User’s Guide
4 On the File menu, click Save to save your changes.
5 Close Notepad.
6 Restart the Kaleido-K2.
Kaleido-K2 MT-Gateway
The MT-Gateway is shipped with current versions of the Kaleido-K2 in support of legacy
applications (the internal gateway was not available in early versions of the software), but
its use is not recommended.
Disabling the Kaleido-K2’s MT-Gateway
To disable the Kaleido-K2 MT-Gateway
1 On the Kaleido-K2, display the desktop (use the desktop icon on the menu bar).
2 Double-click the Services icon.
The Services management console will appear. You can see if the MT-Gateway service
is running, and whether it is configured to start automatically when the Kaleido-K2 is
booted.
3 Right-click MT_Gateway and then click Properties on the shortcut menu.
4 Select Manual as the startup type, and then click OK.
5 Click the Stop Service button on the toolbar to turn the gateway off.