Grass Valley K2 Dyno Service Manual - Manual (Page 80)

80 K2 Dyno Replay Controller Service Manual 02 February 2012
Chapter 4 Removing and replacing FRUs
Motherboard removal
To remove the motherboard, first remove the top and the fan, then proceed as
illustrated.
When installing the replacement motherboard, use the battery that comes with the
replacement motherboard. Do not use the battery that was connected to the faulty
motherboard.
2 Cut zip tie and
relea
s e battery.
3 Di s connect 7 cable s from
motherboard. Refer to
cablin
g dia g ram.
Remove 4 s crew s .
U s e Phillip s P1.
4
Remove 4 s crew s .
U s e 3 /16” nutdriver.
1